Combine two Longshot CS-6 clips to make a 12 round super clip. This modification is fairly simple and will require some minor cutting.
After disassembling the clips you will need to cut the bottom of one clip and the top of the other so they will fit together nicely. The next step is to combine the two springs found in each clip with tape, or whatever you prefer if you know of a better way. Finally, the last step is to glue or tape the two clips together (after you put everything back into your new clip of course).
As you may have guessed this clip modification can be done to Recon CS-6 clips as well since they are the same as the clips that come with the Longshot CS-6.
All in all this is a handy modification that can increase the ammo capacity of your clips, making reloading less frequent.



(4.25 out of 5)
(4.21 out of 5) 
Jason:
Commented on June 22nd, 2009 at 5:02 pm.
Does this mod cause the bullets to flatten more often than the single clip?
ben:
Commented on July 11th, 2009 at 11:04 am.
no it dosnot flatin and if they do
you have been leaving your darts
intolong and if you do then put a
little bit uf tape on the dart a little bit remeber a little bit of tape
jared:
Commented on July 24th, 2009 at 8:37 pm.
dont do it it sucks ass
jimmy:
Commented on August 14th, 2009 at 11:24 pm.
i agree with jared it sucks,you should just leave it the way it came.
Patty:
Commented on August 21st, 2009 at 3:41 am.
I did the other version of this mod, just where you tape 2 clips bottoms together and to reload you just flip it over. It works probably better than this mod, also you can just take the tape of if you’re sick of it.
azzkicker:
Commented on August 23rd, 2009 at 5:05 pm.
It don’t tell you how to do it. It might be cause im on a cell but I no see how to do it
Reed:
Commented on August 23rd, 2009 at 9:26 pm.
there is a video that shows you what to do, but you may not be able to see it on a cell phone.
ethan:
Commented on September 7th, 2009 at 10:25 pm.
it dosent tell you wat to cut it with and its making me mad
Reed:
Commented on September 8th, 2009 at 8:27 pm.
use a hacksaw
Rbt208:
Commented on September 13th, 2009 at 7:34 pm.
Another one of my vids. lol
How does it suck? Mine has been working fine ever since I made the vid. Maybe you guys didn’t make it right.
Mike:
Commented on October 11th, 2009 at 3:27 am.
By how he made this 12 dart clip it seems you could make a 18 or 24 dart clip huh?
Brad:
Commented on January 26th, 2010 at 9:50 pm.
Yeah mike, but hasbro already made a 12 dart clip, the double sided clip which you can buy with the raider value pack at sams club
et:
Commented on May 6th, 2011 at 9:40 pm.
all of you r stupid,why dont you let the man do his thing.He is just tryin to teach you loosers something new.